1. DT large inclination sideband type conveyer B -500 650 800

This large inclination sideband type conveyer is a new type of belt conveyer. This machine has the characteristics of the belt conveyer, and other irreplaceable advantage of the ordinary belt machine. To the place of transport larger inclination, the inclination length require of the ordinary belt machine in the range is very long, but adopts the DJ large inclination sideband type conveyer can shorten the transport distance greatly, the biggest inclination of this machine can be greater than 75, this machine mainly adopts the sideband type conveyer belt, realizes the function of horizontal sending combines with and promoting at the same time.

2. DT75 belt type conveyer Model DT75 Ⅱ belt conveyer

　This Machine is widely used in the transporting of the scattering supplies as various kinds of bulk, granular, powdery and continuous transport of finished product. Used in such trades as the mine, metallurgy, building materials, fertilizer, chemical industry, water and electricity, grain, etc. extensively. Its sending amount is great, structure is simple, maintains is convenient. Can select the poor type, parallel for use according to the different requirement of trade and user. The most transport inclination <220, and the transport length can up to several kilometers.

3. Spiral conveyer serial GX150-700LSS150-200-250-300

　Spiral conveyer is a comparative general transport equipment of the application of grain material and powder material level transported. The structure is simple, maintain convenient, and the fabrication cost is not high, is received by craft designer. The used field is very wide.

4. TLSL vertical spiral conveyer

　This machine is named tube type spiral conveyer too, which has the function of sending and promoting and with good pressurization, it is suitable for the transporting and promoting of supplies with certain distance and height very much. It can be installed with vertical and slope 75 degrees, and the output is ability to form a complete set with sending from 1T-20T/h.

5. Bucket elevator

　Our company has produced the lifting machine equipment for nearly 20 years, it is more than 40 meters high to promote at most, the making precision is high and there is no noise. The type of production are: DTG series, single channels and double channels; DTG lifting machine iron dustpan and mould dustpan optionally; HL type ring chain type lifting machine; PL board chain type lifting machine; T type bucket-off elevator. We can help the users to use the reliable and invest economized lifting machine equipment only on the base of the parameter and specification requirement proposed by the users.

６.Portable belt conveyer

　This machine is used in the application of supplies and finished product with short distance and many angles as granular, powdery, etc. Users can select the groove pattern parallel according to the transported supplies.