1. ZTG series drum turning desiccators

　Drum turning desiccator is a kind of dry machinery that handles a large number of powdery, mud form, or bulk, etc. supplies. This machine is used in such trades as building materials, metallurgy, light industry, chemical industry, etc. to dry various kinds of supplies extensively. Such as the lime stone, clay, slay, coal powder, ammonium vitriol, Anfu powder, ammonium nitrate, nitrate phosphorus fertilizer, calcium magnesium phosphate fertilizer, phosphorus ore, ordinary passed calcium phosphate, super phosphate, three sodium of phosphoric acid, gathering phosphoric acid sodium, urea, oxalic acid, sour potassium chromium, polyvinyl chloride, oxidizing manganese, calcium carbonate, ammonium phosphate, it is the optimum equipment that the compound fertilizer produced.
Performance parameter

2. SK type rotating steam desiccator
　 Rotating steam desiccator is the assembled of the fluidized bed dry and the air current dry, and comes true in a dry equipment, and has the function of deoxidize. The wet material filtrate sends air the supplies to the dry room through the spiral-transporting device, the blender in the dry room makes the filtrate into flow state, and the hot air rotating upward sports drives the drying of the material.
　 The suitable granularity powder and wet qualified after filtration through classifier collect product from the gas and solid separator.
　 Advantages: Can handle the cream supplies with viscidity or without viscidity. The wet supplies can become evenly particle and qualified products in a time, the time of staying in desiccator of the supplies can be adjusted, the dry intensity is high and the coefficient of heat transfer is great

３.FFG type little powder desiccator

　Leiming brand FFG type serial desiccators are the newest advanced desiccator that our company developed by drawing the foreign dry mechanism theory, its structure is novel, and with good performance, every parameter is obviously higher than the domestic similar equipment. This desiccator is collected the crushing, drying and grading these three kinds of crafts in one suit, strengthens the mechanism, to reach the results of high-efficient, energy-conservation, optimizing the finished product quality of the supplies
First, operation principle:
　 This dry equipment is very apt to make the moisture content fewer than 5%, While the destructiveness crushing, the particle of the supplies is up to more than 500 Mu very easily; While the votive crushing, the particle of the supplies reaches under 2um very easily. Reach the above high-performance reasons are: the speed is up to 80 meters / second; the linear velocity of the hierarchical machine is up to 30 meters / second. The principle of this desiccator is: The supplies are pushed in the desiccator tube by the charge-in organization, and then keep in touch with the hot air entered below the device, in the high speed crushing whirling device, the supplies are crushed by rapid machinery, force the particles to shear, assault and grit each other and to be crushed and scattered, in this course, the particle of the supplies reduces quickly, the surface area increases greatly, thus strengthen the dry course, and the supplies which reach the demand are discharged from the material mouth through the whirling classifier of high speed, and are collected by the device, the supplies that are not meeting the requirements are pushed back below by the classifier, subside, crush, dry again, until they are fulfilling the requirements.
Second, main structure:
　 The Model FFG desiccator is made up of such parts as crushing device, dry section , classifier ,etc.
Third, main characteristic:
　 1. It can dry the supplies whose moisture content is up to 80%, after the dryness, the moisture content of the products can be 0.1% at the lowest; 2. It is suitable for the temperature sensing supplies; 3. The granularity of products is even, and can be adjustable; 4. The heat exchange rate reaches 9000W/m 3c , and the energy consumption is low; 5. The technological process are short, the floor space is small; 6. Work under press, and there is not dust to pollute.
Fourth, scope of application:
　 Powdery, glue, cream, pastel, filtrate; Adjusting relevant part, can dry supplies as the bulk, slice, fibrous, thick liquid form, tube, etc.; Dry the surface water, adsorption water, dissolved and bloated water and crystallization water.
Fifth, complementing machine fittings:
　1. Charge-in organization: double spiral charge-in machine, material feed pump, nozzle of pressure or others; 2. Heater; 3. Collection device: One grade collection, the sack cleaner; Second collection: Whirlwind cleaner and sack cleaner; 4. Air blower, pipeline; 5.Air cleaner; 6.Anti-blast protector.
　 This equipment is widely used abroad, used in such trades as mineral products, chemical industry, medicine, food, plastics, dyestuffs, pigment, agricultural byproducts, etc. mainly. It is the key equipment of wet way to produce such supplies as heavy calcium, light calcium, kaolin, gypsum, etc..

4. Pulse tube type air current desiccator of Model MQG

　Pulse tube type air current desiccator is the alternative shrinking and expanding of the dry pipe's diameter. The particle of the supplies is accelerating and decelerating constantly in the dry course to lengthen the time that the supplies in the dry tube, the relative speed and the heat area between the air and particle are relatively large, thus strengthened the speed of heating.

5. Residue double air current desiccator of 9ZG

　Single grade pulse tube type air current desiccator group shut this machine. The residue whose moisture content is 60-70% enters the desiccator in advance to mix, when the moisture content dehydrates to certain extent, the supplies enter the pulse for continual drying, then be sent to the next pulse air current desiccator through the spiral sender. The residue that dried by this machine has such advantages as not too burnt or paste, the protein loses small, and dries fast, and the quality is high, etc.

6, Fast desiccator of high wet supplies of LMGS

　Scope of application: This machine is suitable for drying the organic, inorganic compound, active mud, water mud, and mud form, powder granular, slice high wet supplies as chicken excrement, ox excrement, pig excrement, soil, herb, residue, etc., chicken excrement, etc.
　 Summary and operation principle: CKG series desiccator is a kind of high-efficient desiccator with multiuse that consults the materials and combines the developing act of our country, through the updating, it has already reached the domestic advanced level now, it not only can deal with the mud with lower viscidity, can also deal with the dirt with bigger viscidity. The application scope of this machine is large, can save energy, the appearance of it plays a very big role to the environmental protection and materials reuse. This machine is suitable flowing type machine. Supplies are sent into the turning cylinder through the material-giving device, then installed on the special material board to up and down, In the course of falling down, the supplies are crushed by the high speed whirling blade, dried under the surrounding of hot wind ceaselessly till moving to the exit. Cause the exposed area of supplies and surface hot air is heavy, so dried fast.

7. SGQG tertiary cylinder air current desiccator

　This machine is a new product that our company designed on the base of absorbing foreign advanced desiccator technology. It is made up of cylinder turning set, middle tube, outer tube, and air current desiccator. It adopts the tertiary cylinder suit, the hot utilization ratio is high, it is of good performance to keep warm to make the supplies fully keep in touch with the hot wind, and it adopts the high temperature high wet dry craft, conducting heat coefficient to be heavy, and the yield can up to 15 tons material per hour.
This machine is suitable for drier of such supplies as high wet alfalfa, leaf of the ginkgo, straw, yellow bamboo grass, medical herbs, saw-dust, dreg of the fruit, residue, etc..
Main technical parameter

8. GRL series high efficient and energy-conservation hot-blast furnace

　The GRL high efficient and energy-conservation hot-blast furnace is a special heat source equipment of heating the air and sending the hot blast, and it is made up of burning room and heat changing body. This product is the "the Ninth Five-Year Plan" sci-tech popularization product of our country. The GRL high efficient and energy-conservation hot-blast furnace takes the combustion chamber by itself, it is the integrated hot body of combustion chamber and heat source changing equipment. The hot-blast furnace according to the characteristic of each position, utilizes its special structure, integrates many kinds of hot way in one unit, and there is conformity heat changing way with different temperature. To make the temperature of the heat changing body not pass the oxidized temperature material, and to make the heat changing body not oxidize and burn in the high-temperature flame district. The hot-blast furnace takes the form of drum, utilizes the pipe structure, causes the air and the high-temperature exhaust gas to flow in each intermediate lay, two sides carries on hot exchange, has improved the result of conducting heat. It has such characteristics as structure is novel, cubage is small, thermal efficiency is high, saves the fuel, hot-blast temperature is high, long performance life, etc. The hot-blast furnace regards the coal, coal gas (include the natural gas and liquefied gas),as the fuel and eliminates the smoke with the smoking guiding machine.
　 Main technical feature of the hot-blast furnace, hot wind 1000-3000s mark meters of 3 /hour, hot-blast temperature is 100 -3502C , thermal efficiency is 75-80%, service life is more than 5 years, compared with boiler steam heat exchanger, each one economizes 120,000-180,000 Yuan of fuel expenses every year. the hot-blast furnace has already seriation and standardization .