Various pulverizers, breakers and little

powder machines

1、Hammer leaf type pulverizer

　 This machine regards assaulting and crushing as operation principle, regards the regular and vertical sieve hole board as the template, regards the high speed rotor hammer leaf as the assault, to make the supplies crush in the crushing room. The granularity of the supplies is controlled by the longitude of the sieve hole. This pulverizer can be used in raw fodder materials, maize, phosphorus ammonium, etc. and various kinds of organic supplies whose moisture content is lower than 13%. It can be put φ 0.8-5(mm). The production efficiency of this machine is high, operation is steady, and it is easy to change and convenient to maintain.

2. sel-sucking type square hammer leaf pulverizer

　 This machine regards assaulting and crushing as the operation principle, entering the crushing room by absorbing the materials with minus pressure, and produce materials through the plus pressure whirlwind separator and or material- collecting storehouse automatically. The appearance of the pulverizer is the square structure, with elegant appearance, and it is extremely convenient to operate, the granularity can change different specifications of sieve board to reach producer's different demands.
Scope of application: Feed factory, cultivate factory, grass powder process, agricultural outgrowth powder material process
Model 4KB40 Motive force: 7. 5kw Production capacity: 400 -600kg /h
Model 4KB53 Motive force: 11kw Production capacity: 600 -800kg /h

3. Straw pulverizer

　This machine regards assaulting and crushing as the operation principle, with the pneumatic type rotor hammer leaf, the supplies after crushing enter the cage by pneumatic machine to finish the process. This machine is especially suitable for agriculture cubic supplies as straw, rattan and potatoes, etc. The rotational speed of the pulverizer is up to 3000 turns / minute above.

4. Squirrel-cage pulverizer

　This machine regards assaulting, grinding and crushing as the operation principle, regards a relative squirrel age that rotates of two phase as the job part, it is commonly called as squirrel-cage pulverizer, and regards the cage stick as the grinding body, though the relative rotational speed of the rotor is up to 3000 turns / minute above, the operation of the equipment is very steady. While the supplies entering the relative operation cage, the supplies are ground and crushed under the circumstances of the high speed rotates centrifugal function, so the granularity is even, it is especially suitable for the crushing of the neutral hard supplies. and it is widely used in mine, building materials, compound fertilizer and inorganic chemical industry ,etc..

５、Chain pulverizer

　Vertical ring chain breaker used mainly in broken cubic phosphorus compound fertilizer and medium-sized cubic supplies, The productivity of this machine is high, the structure is simple and compact, and the operation and the safeguarded are convenient.
　 Operation principle: while the supplies entering the machine tube through the feeder, it is broken by the colliding with a high speed whirling ring chain and the colliding each other, at the same time, cause the effective of the centrifugal force, the supplies broken again by colliding between the walls, and fall into the next ring chain surface round., then go on being broken, finally, produced from the material mouth.

６、Claw type without sieve pulverizer

This machine is a special-purpose pulverizer that our company developed on the base of the advanced technology in the world. The machine has the unique superiority to the crushing of inorganic saline mineral raw materials. The machine is the gear structure, the supreme rotational speed is up to 3500 turns/ minute, the granularity is up to 80-100 Mu, the output is up to 800 -1000kg /h, and widely used in the crushing of the above-mentioned neutral hardness mineral. For instance such trades as sulfate series, refractory material, glass, mine raw materials, pottery, etc..